EDCO PRO Walk Behind Concrete Saw 18" KL-18

The EDCO PRO Walk Behind Concrete Saw 18” KL-18 is a walk-behind saw that was designed to make accurate, large cuts through tough material. This saw is gas powered with an 18 inch blade capacity and a maximum cut depth of 6.75”. Some features include a 13 HP engine, a 7-gauge steel blade guard, and a screw boot belt tensioner to prevent frame damage. The saw’s primary uses are for short-run slab cutting, patch repairs in asphalt, and traffic loop installation.

The concrete saw currently sells for $3,157 directly from EDCO, but the blade is not included. A lifting bail is optional, but recommended for safe transportation and storage. EDCO also recommends step cutting, so as not to cause any accidental damage.

While no recalls were discovered and no common malfunctions occur with this particular saw, all walk behind saws carry risk. It is important to wear eye and ear protection, as well as wear a dust mask or respirator. Before use, check the condition of the blade to ensure ideal performance.

EDCO also offers an 18” electric walk behind saw called the Downcut. This model is more expensive, selling for $5,136, and is different in a few ways. The electric saw is lighter weight and doesn’t emit fumes, so it is recommended for use in enclosed areas. It is also, however, less powerful than its gas counterpart and must be plugged in to use, restricting your workspace.

The EDCO PRO Walk Behind Concrete Saw 18" KL-18 can be identified by its multiple EDCO stickers. The model is beige, has wide-T handles with rubber grips, and has two molded rubber wheels in the back and a smaller one in the front. There is a crank located on the fop back under the handlebars. You can avoid confusing it with the electric model by checking to see if there is an engine.

• Engine: Honda GX390
• Cutting depth: 6.75 in.
• Blade Capacity: 18"
• Horsepower: 19
• Cut Frame: 7 gauge
• Motor Type: Gasoline

Company Website

Operator's Manual

Part List Manual