1987 VW Type 2 T3 dashboard disassembly

Written By: Lukas
  • Comments: 1
1987 VW Type 2 T3 dashboard disassembly

Difficulty

Difficult

Steps

5

Time Required

2 - 4 hours

Introduction

  • Look closely at the steering column cover

  1. VUQaSnvXmGienwDG

    • Clear all the stuff from your dashboard.

    • Then pull the radio out of the shaft.

  2. DE1dRtRJPUvxINjR
    DE1dRtRJPUvxINjR
    fKoVLAmLwVvdrKTV

    • With a jerk you lift the cover of the console (dashboard) from the windshield ago.

    • Loosen the 4 screws on the left and right of the instrument panel. IMAGE

    • Pull the switches in the instrument panel off the plugs and set aside

    What is the purpose of that switch/signal?

    neubauertamas24 -

  3. LjvlXvZEhnyluixj
    LjvlXvZEhnyluixj
    RhIlSYOskDGKDbnJ

    • The hazard warning lights have a blue and a brown single cable in addition to the plug

  4. c4cnErdOCvPYxn2j
    c4cnErdOCvPYxn2j
    LCDgC2HXxtoS1uXO
    wrSeDBR6qoVFMJuW

    • When lifting the instruments (on the side of the speed display), pull the white plug.

    • On the back of the speedometer, remove the plugged-in speedometer cable from the white plug. [Br] Now remove the instrument panel

    • Remove the buttons for the ventilation and heating controllers and the rotary switch. PICTURE Then carefully pull the frame of the controls forward.

Conclusion

Work through the steps in reverse order to reassemble your device.

Author

Lukas

Member since: 25/12/13

183 Reputation

0 comments