Introduction

Use this guide to replace the Windshield Washer Nozzles on your 2004-2012 Nissan Versa. Nozzles can fail due to normal wear and tear or be physically damaged. Symptoms of a bad Windshield Washer Nozzle include fluid leaks around the nozzle, inconsistent washer fluid spray, and visible damage to the nozzle.

WARNING! WHILE OPERATING AT DRIVER'S SIDE: When removing the nozzle, do not release the hose. If it falls into the hole, it could be very difficult to retrieve. Make sure you have the replacement nozzle at hand.

  1. R3wahqTDKTs4CKGp
    R3wahqTDKTs4CKGp
    aEowE5WYVBjFM1VU
    • Lift up the windshield wiper arm to work comfortably.

    • Insert the flat end of a spudger in the bottom of the nozzle and push, just a little.

  2. wPx5RNOAR6sUaSiX
    • Using your fingers, take the nozzle and pull it up until you can see the hose.

  3. WtdGHqGuPFIyPNPj
    WtdGHqGuPFIyPNPj
    K2MMhSQmuVnSsVM4
    • It could be difficult to separate the nozzle from the hose. Because of that, you can use this skill. You are going to need a cloth rag and hot water.

    • First, set the cloth around the hose.

    • Next, pour the hot water over the cloth. Do not harm yourself!

  4. jLPOHAVExBmZhf4Q
    • Take out the cloth.

    • Using the flat end of a spudger, start to separate the nozzle from the hose.

    • WHILE OPERATING AT DRIVER'S SIDE: When removing the nozzle, do not release the hose. If it falls into the hole, it could be very difficult to retrieve.

    • Use your thumb to keep the end of the hose outside.

    • Make sure you have the replacement nozzle at hand.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Gianfranco Sergi

Member since: 13/12/17

4467 Reputation

0 comments