Introduction
This guide provides step-by-step instructions for replacing the low-beam headlights on a 2012-2016 Honda Accord. Over time, headlights can dim, burn out, or become cloudy, reducing visibility and compromising safety. Replacing the low beam bulbs is a straightforward process that can be completed with minimal tools. This manual will help you navigate the replacement process efficiently and safely.
-
-
To begin, you need to open the hood. You can find the hood release lever on the bottom of the door next to the pedals or foot brake.
-
-
-
After you pull the hood release button you should hear a click. To fully open the hood, you need to put your finger under the hood and find the little clip to open it. When you find it, be careful cause some hoods can be heavy.
-
-
-
Secure the Hood.
-
After opening the hood, pull the securing bar and position it in place. There should be a hole in the hood above where you can slot the bar into.
-
-
-
Find the Low Beams Headlights.
-
The headlight spots can be found in the marked areas. These can be found on the back of each light. At this point, make sure your car is turned off before proceeding.
-
-
-
Find the Headlight Spot.
-
Once located, carefully remove the socket, keeping in mind that it is secured with a clip and can break easily if handled too forcefully.
-
-
-
To remove the clip, either pull it downward or, depending on the direction of the cable, apply backward pressure.
-
After that, turn the bulb counterclockwise and pull it off.
-
-
-
Double check the bulb number and name.
-
Put the new bulb in.
-
Check the signal and the dashboard, then turn on the car and lights.
-
You're done.
-
