Introduction

In this guide, I will show you how to replace a RAM in an ASUS G713RC laptop. It may seem like a hard replacement at first look, but it will be fairly simple and not time consuming. Not replacing your RAM in time may cause issues to your laptop so it is important to replace it as soon as possible. No worries! This guide will help you replace one.

Hazard Warning: If you have small children, please do not leave any small parts from the laptop that can be easy access to the child. It can be a choking hazard.

  1. JTWGpt5FC3aiLXh2
    JTWGpt5FC3aiLXh2
    r5gp4yYYH11NVrrq
    YqKFntQSq4tC3BoN
    • Warning: Do not touch any other components inside if you don't have to. It may result in damage and can destroy your laptop.

    • Remove the seven large screws using a Phillips #00 screwdriver.

    • Remove the four small screws using a Phillips #00 screwdriver.

    • Carefully lift the lid, being careful of the two cables connected to the laptop.

  2. jTuJiK55sCPreCdn
    jTuJiK55sCPreCdn
    JQZ1d4AQEHWjwexs
    M25S1GJqXR1XNKFq
    • Carefully detach the two white cables that are connected to the lid.

    • Set aside the lid.

  3. OZnZ4VJETDdAZroy
    OZnZ4VJETDdAZroy
    rdhOHITZbvkbMGRZ
    TxeIrHApScfK3vPL
    • Carefully lift up each gray bar.

    • It is important that you don't completely remove the gray bar.

    • Remove the RAM.

  4. WXRBOJDdLdOvuLHD
    WXRBOJDdLdOvuLHD
    iXaWHWMcHaQafYe5
    j2DYQjkNwtV3fbkP
    • Insert each RAM stick under the gray bar. Push until you hear a click.

    • Hold down the gray bar to make sure it is flat and secure.

    • It might be a bit bumpy, but it is nothing to worry about.

    • It is important that you don't completely remove the gray bar.

  5. oTHR1Rjv5UXSbVcK
    oTHR1Rjv5UXSbVcK
    5UosEZyKPwMJGp3P
    • Reattach the lid by connecting the white wires to the base.

    • Plug in the white wires on both sides. You want to plug them in thoroughly, otherwise, your laptop won't turn on.

  6. HfgYRP1X1tC4aHy3
    HfgYRP1X1tC4aHy3
    jwmWaNSEOCeAVYDK
    • Line up the lid to the laptop.

    • Tighten the seven large screws using a Phillips #00 screwdriver.

    • Tighten the four small screws using a Phillips #00 screwdriver.

Javier Bobadilla

Member since: 23/10/24

157 Reputation

0 comments