ASUS ROG Strix G15 G513 Battery Replacement

Written By: Gia Hung Nguyen
  • Comments: 0
ASUS ROG Strix G15 G513 Battery Replacement

Difficulty

Easy

Steps

7

Time Required

15 - 25 minutes

Introduction

Laptops, particularly gaming laptops, are highly favored by many, due to their portability. However, gaming laptops still encounter issues related to battery durability because of heavy use and constant charging. If the battery in your ASUS ROG Strix G15 G513 has come to the end of its life cycle, follow this guide to replace it.

Before beginning this repair, power off your laptop and unplug it from the charger. If your battery is swollen, take appropriate precautions.

  1. EdOIBrcCBA1VTWsE
    EdOIBrcCBA1VTWsE
    YLWywkmrO2KRFGNI

    • Flip the laptop over.

    • Use a Phillips #0 screwdriver to remove:

    • Four 3 mm-long PH0 screws

    • Three 6 mm-long PH0 screws

    • Two 5.5 mm-long PH0 screws

  2. u1edPTAssgX2QEAv

    • Use an opening too to gently pry the back case from the laptop.

    • Take care not to force it and open it very slowly. Do not remove the panel from the main chassis completely as it is connected to the motherboard by two ribbon cables.

    • Start from the middle and work around the perimeter to release the clips securing the back case.

  3. ZpReVu1pmniyecSQ
    ZpReVu1pmniyecSQ
    xKUPeoMPYljs25QE
    UwP2MTM4bYmvCScx

    • When detaching the bottom panel, you'll notice two ribbon cables connecting it to the motherboard.

    • Use the tip of a spudger or your fingernail to flip up the small black locking flap.

    • Gently pull each ribbon cable from its socket.

    • The white line on this ribbon cable marks the edge of the connection area. To reinstall, insert the cable into the connector up to this line, and then close the locking flap. If the cable doesn’t insert easily up to (or very near to) this line, it’s probably misaligned and needs to be gently removed and repositioned.

  4. vwBRG1f5s3VVYS2F
    vwBRG1f5s3VVYS2F
    4mkYMMf1sP3UXuSd
    buqXWrhlHUfWSUdg

    • Push up on the silver lock securing the battery connector.

    • Push gently to avoid damaging the socket.

  5. rIWy5B3IOQgOE22m
    rIWy5B3IOQgOE22m
    EjoRgU5KjMSkWBFV
    ykX3HXRkUBsKb4Rh

    • Use a Phillips #0 screwdriver to remove the four screws securing the battery.

  6. XjNc6WoYOOXiGPYQ

    • Disconnect the battery cable from the socket on the motherboard.

  7. SHTSLQH1KtAOxTa1
    SHTSLQH1KtAOxTa1
    qkhnaOdOUB4vERFe

    • Remove the battery.

Conclusion

To reassemble your device, follow these instructions in reverse order. For optimal performance, calibrate your newly installed battery after completing this guide. Take your e-waste to an R2 or e-Stewards certified recycler.

Author

Gia Hung Nguyen

Member since: 05/02/24

265 Reputation

0 comments