ASUS X502CA LED Board Replacement

Written By: Beau Raymond
  • Comments: 0
ASUS X502CA LED Board Replacement

Difficulty

Moderate

Steps

6

Time Required

10 minutes

Introduction

This guide entails how to quickly and correctly replace the LED board for the lower led lights on the front of an ASUS laptop. The LED board is one of the simplest parts to replace on the inside of the ASUS laptop so don't be intimidated by the task. With the help of this guide you will be able to replace them without a hitch.

  1. qWC1aeIsA1M1OGch

    • Use the Phillips #00 screwdriver to remove the seven 90mm screws.

    • Use the Phillips #00 screwdriver to remove the four 50mm screws.

  2. ZWLs3MKHBgUBenEC

    • Next, use the plastic opening tool to carefully pop off the keyboard cover panel.

    • Be cautious when pulling off the cover because there are cables you will have to disconnect before completely removing the panel.

  3. CXxHpdwpMKHTAh4d
    CXxHpdwpMKHTAh4d
    WgEmifKaORvyMPDt

    • Lift palm rest and unplug keyboard cable and touchpad cable using tweezers. After these two cables have been unplugged you can remove the keyboard cover panel.

  4. nlEF1UGiDRqvgCVT
    nlEF1UGiDRqvgCVT
    JqV1ZEYNuKqOUC5e

    • Lift Palm Rest away.

    • Replace with new palm rest.

  5. 1FPJAaGQcRLxnQwt
    1FPJAaGQcRLxnQwt
    y1JWnVgjdgmMo5cg
    JpgdquFGn5sPTBeN

    • Use the plastic opening tool to flip up the small clamp and pull out the ribbon cable.

  6. joZcDAvOO16mnjKg
    joZcDAvOO16mnjKg
    oRJgRJWiOcsCHqDD

    • Use 1 or 2 plastic opening tools to push down the small black plastic clips.

    • Pull the board up and out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Beau Raymond

Member since: 06/11/18

103 Reputation

0 comments