Acer Chromebook Spin 511 (C741L) N20Q8 Display Assembly Replacement

Written By: Lauryn F
  • Comments: 0
Acer Chromebook Spin 511 (C741L) N20Q8 Display Assembly Replacement

Difficulty

Moderate

Steps

7

Time Required

15 - 30 minutes

Introduction

If your Acer Chromebook (Spin 511 C741L N20Q8) screen is turning off, has dead pixels, or will not display anything, the screen may be broken or defective. In order to display images again, the display assembly may need to be replaced.

Before beginning, ensure that the device is powered off and disconnected from any external sources. Then, follow these steps to replace your display assembly.

  1. rOs2sGXCmM3JTCM3
    rOs2sGXCmM3JTCM3
    cJScbVheHYt4iF3W

    • Remove the eleven 2.4 mm screws securing the back plate and internals of the Chromebook using a Phillips #1 screwdriver.

  2. fsWgCLl2yZ1BhuKK
    fsWgCLl2yZ1BhuKK
    dBbqsDkHpo1LeqLK

    • Use an opening pick to remove the backplate of the laptop revealing the internals of the Chromebook.

  3. jN3lRMsbRkOJbNHh
    jN3lRMsbRkOJbNHh
    x3Pr5GirJOpvCkMt

    • Remove the six 2.4 mm screws from the hinges using a Phillips #1 screwdriver.

  4. YNXPMcAwoLfsCNbQ

    • Flip up the hinges on each side that were previously secured down by the screws.

  5. RwOjyDJ1212rOqXS
    RwOjyDJ1212rOqXS
    PElyVTggEew5IONM

    • Carefully detach the blue, yellow, and black wires from their connectors.

  6. blmZImgcrej4YFTk
    blmZImgcrej4YFTk
    4D5CFWCISQWpBmHD

    • Remove the electrical tape from the black connector and gently remove it from the socket.

  7. B1OIRokO1Gco3o1j
    B1OIRokO1Gco3o1j
    YiC1VxOjm23Z1mmu

    • The base and display assembly are now able to be separated. Simply pull and remove the display assembly from the base of the laptop.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Lauryn F

Member since: 26/09/24

710 Reputation

0 comments