Amazon Kindle 8 Battery Replacement

Written By: Luke
  • Comments: 1
Amazon Kindle 8 Battery Replacement

Difficulty

Easy

Steps

6

Time Required

30 minutes

Introduction

If your Amazon Kindle 8 no longer holds a charge, drains quickly, or doesn't turn on, use this guide to replace the battery.

The battery provides power to the Kindle. Over time, batteries may degrade, which could affect performance and usability.

Before beginning, try basic troubleshooting steps like charging with a different cable or power adapter to ensure the issue lies with the battery.

Follow the steps carefully to avoid puncturing the battery, which could create a safety hazard.

  1. pCiRbuZFtSMKS5vh
    pCiRbuZFtSMKS5vh
    SvkEDcjFyDoyxdSX

    • Insert the iFixit opening tool into any corner of the Kindle’s front cover.

    • Gently slide the tool along the edges and carefully separate the front cover from the inner front cover.

    • Keep even pressure to avoid any cracks.

    • Lift front cover once all clips are disengaged.

    • Lift the screen gently so that it is not cracked.

  2. bXwNrLmWpJX6YuX6
    bXwNrLmWpJX6YuX6
    ebJUdHPtUyfmEDy2

    • Insert the spudger between the inner cover and the screen.

    • Gently work your way around to loosen the front cover.

    • Carefully lift the front cover from the device.

  3. Sk2vYtlkfFs2cuFi
    Sk2vYtlkfFs2cuFi
    KA34MTNgAJJmUbF6

    • Use a T4 Torx screwdriver to remove the seven 3 mm screws around the perimeter of the device.

    My Kindle's top two screws are similar to the placement here. But the ones at the bottom are tucked under the motherboard. How do I access these?

    Nathan Hughes -

  4. NmoageDtDNvGG3oN
    NmoageDtDNvGG3oN
    ofqjYKVa1MJOyFiR

    • Lift the screen and motherboard from the back cover.

  5. sVQYRPVXRgslPdQW

    • Pinch the clips on the battery and disconnect the battery connector from its socket.

  6. uKuKnhIWXJKi2YKX

    • Insert the halberd spudger between the motherboard and battery.

    • Take care not to bend, twist, or puncture the battery.

    • Slowly move the spudger around the battery and pry it off.

    • The battery is glued in place, so don't be afraid to use some moderate force.

Conclusion

To reassemble your device, follow the above steps in reverse order.
For optimal performance, after completing this guide, calibrate your newly installed battery.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

Author

Luke

Member since: 25/09/24

420 Reputation

0 comments