Anbernic RG35XX Battery Replacement

Written By: Katie Cabrera
  • Comments: 0
Anbernic RG35XX Battery Replacement

Difficulty

Easy

Steps

4

Time Required

10 minutes

Introduction

The battery supplies power to the device that allows hours of playtime. If the battery isn't turning on, use the Anbernic_RG35XX_Screen_Glitch guide to determine the possible issues. This guide shows how to replace the battery.

  1. PDG61GMRgP1hFTGE
    PDG61GMRgP1hFTGE
    5uPINXU3TFy3DYbj

    • Remove the SD card located on the right side of the device by pushing into the SD card slot and pulling the card out.

    • Remove the six 1.2 mm screws that secure the back case with a 2.5 Hex Bit screwdriver.

  2. rCVS5SQCVqKE6W3W

    • Insert an opening tool into the MicroSD card slot and twist it clockwise to begin releasing the rear case.

    • You'll hear "clicks" as the retaining clips release.

    • Pry around the entire perimeter until the rear case fully releases.

    • Remove the rear case.

  3. qa6TXMPhcHeQGgEL
    qa6TXMPhcHeQGgEL
    pdyenmrpHxavaRqU

    • Use your fingernails or tweezers to gently remove the battery connector from its socket.

  4. twKd1RAcUyeoB4br
    twKd1RAcUyeoB4br
    dyBYOCJBud52PNKH

    • Use a spudger to gently pry around the perimeter of the battery until it releases.

    • Take care not to bend or puncture the battery.

    • If the battery is stubborn, use a hairdryer to heat the battery and loosen the adhesive that secures it to the chassis.

    • Remove the battery.

Conclusion

To reassemble your device, follow the above steps in reverse order.
For optimal performance, after completing this guide, calibrate your newly installed battery.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

Author

Katie Cabrera

Member since: 28/08/24

490 Reputation

0 comments