Anker Soundcore Space Q45 Motherboard Replacement

Written By: Kristen Gismondi
  • Comments: 3
Anker Soundcore Space Q45 Motherboard Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

This guide will show you how to replace the motherboard in your Anker Soundcore Space Q45 headphones. You will need to remove the outer casing of the right headphone to access the motherboard.

  1. Xy5NHIeWQfWIEdad

    • Use the iFixit opening tool to disconnect three clips holding the outer covering in place.

    • Clips at 3 o'clock, 7 o'clock and 11 o'clock

    • Image shows right headphone, battery is in left.

    Battery is in left side, three clips to release

    nic... -

  2. l53dNTw2QgrfTons
    l53dNTw2QgrfTons
    1nlOIxGXMHtdbj3t

    • Remove three screws holding the inner plastic covering in place with a Phillips screwdriver.

    • Image shows right headphone, battery is in left.

    These photos show right side, left side with battery has ribbon connector for charging port.

    nic... -

  3. MZmpGoHCUkPuUR2X
    MZmpGoHCUkPuUR2X
    oRYTVqmPSXEJtvm5

    • Remove two screws from the motherboard with a Phillips screwdriver.

    • Remove the motherboard from the headphones.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kristen Gismondi

Member since: 12/11/14

92224 Reputation

One comment

What is the IC chip on board?

GJN -