Bissell Power Force Helix Vacuum Belt Replacement

Written By: Anna
  • Comments: 0
Bissell Power Force Helix Vacuum Belt Replacement

Difficulty

Easy

Steps

7

Time Required

5 minutes

Introduction

The vacuum belt supports the rotation of the brush roller to assist in picking up dirt. Sometimes vacuum belts break, either due to an incorrect installation or simply from wear and tear. It is recommended to replace the belt every 3-6 months.

Use this guide to replace a belt on a Bissell PowerForce Helix Bagless Upright vacuum, Model 2191.

Before you begin, make sure to unplug the vacuum's power cord before disassembling anything.

  1. UWqmO1DeNmGPvUBj

    • Remove the five 8 mm screws with a Phillips #0 screwdriver.

  2. UrCAKqRIohWSQANP
    UrCAKqRIohWSQANP
    Un4pwKg4rNrqk1qU

    • Remove the black and blue vacuum panels.

  3. wTeZbyMtFAHJgmTU

    • Unhook the brush roller from the vacuum, along with the belt.

  4. jXIRMWmhmedOkOpw

    • Locate the metal pin in the top left corner of the vacuum.

  5. uNlNoCmcsQoTSrXo
    uNlNoCmcsQoTSrXo
    nxhcmD3Z2AiS3aEg
    tLAtTwv3xhZJCiG4

    • Loop the replacement belt around the metal pin.

  6. MZmeRSdeMTBQCYdb

    • Hook the belt over the notch on the brush roller.

  7. t1wl2inDTXTGCPxF
    t1wl2inDTXTGCPxF
    nIYOAB3mYj4SnQrk

    • Stretch the belt and brush roller towards the end of the vacuum.

    • Pop the brush roller back into place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Anna

Member since: 23/09/24

145 Reputation

0 comments