Bissell SpotClean ProHeat 5207U Float Gasket Replacement

Written By: Edy Mendoza
  • Comments: 0
Bissell SpotClean ProHeat 5207U Float Gasket Replacement

Difficulty

Moderate

Steps

3

Time Required

5 - 10 minutes

Introduction

Is the water tank on your Bissell SpotClean ProHeat 5207U leaking? It could be because of a failing float gasket. Follow this guide to replace the float gasket on your Bissell SpotClean ProHeat 5207U .

  1. guJvrNqWaJIXMOSE
    guJvrNqWaJIXMOSE
    MTsuek6NIsDI1FLk
    FDwQShTNj56B3Zmj

    • Ensure the device is unplugged.

    • Position the device so that you can see the text at the bottom saying "SpotClean ProHeat."

    • Remove the dirty water tank located to the right.

    • The tank should read "dirty" on the inner edge.

  2. yqWMbdt6XQp2fDon
    yqWMbdt6XQp2fDon
    O4Qc4nmboLlDVE1k
    LxOjaKWmCsVdPunt

    • Rotate the bottom of the flow stack counterclockwise until the float stack comes loose.

    • Remove the float stack from the tank.

  3. dYxlSHXH4E3qYW6S
    dYxlSHXH4E3qYW6S
    wQfCY4QUW2je1A6M
    UHV1JU46RP2C3Qnj

    • Use tweezers carefully remove the white O-ring.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Edy Mendoza

Member since: 13/09/23

422 Reputation

0 comments