Bralette Foam Insert Replacement

Written By: Tasnuva Bushra
  • Comments: 0
Bralette Foam Insert Replacement

Difficulty

Easy

Steps

8

Time Required

4 - 10 minutes

Introduction

Most bralettes have foam inserts to provide support and shape. Over time, the use of the bralette will cause the foam inserts to be worn out and reshaped. We must replace the old insert with the new ones to gain back the support and shape it once gave.

  1. LAZYDAunFmUKgiVV

    • Lay out the bralette in a clean and flat place.

  2. PxuuyrGswWZfW13k

    • Find the foam insert pockets.

    • These are usually found in the cups or sides of the bralette.

  3. xHRMnKikvliiQrud

    • Take out the existing foam inserts by carefully pulling them from their pockets.

  4. SptCdpRgjxKaxeLW

    • Use a lint roller to remove lint or dirt in the pockets.

  5. jMm112MPEEveYoNS

    • Select the right roam inserts that have the perfect size and thickness for the bralette.

  6. erWao3N2xwphPOAt
    erWao3N2xwphPOAt
    WNKiOj6HyEBVV3LS

    • Slide the replacement foam insert into the pocket of the bralette.

    • Make sure no bumps are present.

  7. lEDUYrmWZA1LLkxS

    • Once inserted, make sure the foam inserts are in the correct place and give the ideal shape and support.

  8. oQOgtvRHpKWtkuO3

    • Put the bralette on to check the shape and support of the replacement foam inserts.

    • Make any improvements if required.

Conclusion

You did it! You have replaced your old foam inserts to revamp your favourite bralette.

Author

Tasnuva Bushra

Member since: 04/07/24

157 Reputation

0 comments