Brother PT-D200 Cutter Blade Replacement

Written By: Blaire McCreary
  • Comments: 2
Brother PT-D200 Cutter Blade Replacement

Difficulty

Easy

Steps

3

Time Required

30 seconds - 1 minute

Introduction

This guide will walk you through the process of replacing a dull or broken cutter blade on a Brother PT-D200.

  1. PhSL2lUZMSVYhByo
    PhSL2lUZMSVYhByo
    lmWWxTPYaG4waPDI

    • Open the back panel of the device by pressing down on and then pulling the indication arrows on the top center of the cover upward towards you.

  2. 15HA55JtVYvFy6Xo

    • Locate the cutter blade unit (mint green) as shown in the picture.

  3. S13tqedSsLPRhpBP
    S13tqedSsLPRhpBP
    FaLHnCNsycoUqeYA

    • Using the thumb and forefinger, pull up, applying a moderate amount of pressure until the cutter blade unit loosens and is removed.

    • The blade is sharp.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Blaire McCreary

Member since: 24/01/14

201 Reputation

2 comments

Where can you order the replacement blade?

mistymeziere -

Thank you it, the blade came out and I did not know how to fix this.. found this video and quickly fixed it..

niva -