Canon EOS Rebel XS LCD Replacement

Written By: Daniel Bussone
  • Comments: 0
Canon EOS Rebel XS LCD Replacement

Difficulty

Difficult

Steps

6

Time Required

No estimate

Introduction

Use this guide to replace the LCD. The LCD tends to fade after about five years.

  1. Kcgp6pWKiadnk2j4

    • Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

  2. yYTsJRNaE32s2tr2

    • On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

    • Pry up the panel; starting from the front/bottom corner, as indicated.

    • There's a concealed lip, under the opposite edge.

  3. aBXY4aUaOWiGZNw4

    • Remove the three long black screws from the bottom using a #00 Phillips screwdriver.

    • Use tweezers to lift the panel.

  4. Z4fqP2LlsYFVPAoh

    • Once you have detached the back cover, use a pair of tweezers to lightly pull on strap found connecting the back cover to the camera.

  5. RTwAU4yKJ6HDIUg6

    • Use the tweezers to gently remove the straps (in the teal box).

    • Use the Phillips Screwdriver to remove the four screws (in the red dots).

    • Use your fingers to remove the silver plate.

  6. TNPQpUfmByAKgI4h

    • Use the Spudger on the edges of the screen.

    • Once one end is lose, use the tweezers to lift the screen.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Daniel Bussone

Member since: 28/01/11

1260 Reputation

0 comments