Canon PowerShot A80 LCD Screen Replacement

Written By: konrad

Comments: 1

Canon PowerShot A80 LCD Screen Replacement

Difficulty

Moderate

Steps

Time Required

20 - 40 minutes

Introduction

Is your Canon PowerShot A80’s LCD screen blurry, cracked, or failing to display images? This guide walks you through replacing the faulty screen so your camera can function like new. A broken LCD makes it tough to focus on your subjects or navigate settings.

Important: Before starting, turn off the camera and remove the battery to avoid electric shock or damage. If you're unsure whether the screen is the issue, visit our troubleshooting page for more help.

Tools

Phillips #00 Screwdriver

Step 1

Using a Phillips #00 screwdriver, remove the two 2.9 mm screws on the side of the LCD screen.

Step 2

Using a Phillips #00 screwdriver, remove the 2.9 mm screws on the other side of the screen to separate the front and back covers.
To access the second screw, rotate the screen 90° so that it faces upwards.

Step 3

Gently remove the front and back covers from the screen.
Peel back the plastic circuit cover.

Step 4

Pull the screen away from the base.
This will take some force, but remember to handle with care.
If a small metal piece between the screen cover and the screen falls out during repair, replace it with the rounded corners facing away from the screen during reassembly.