Casio SPF-40 2273 Battery Replacement

Written By: Acn0w

Comments: 5

Difficulty

Easy

Steps

Time Required

10 minutes

Introduction

For this disassembly we will need a phillips screwdriver 1.5 and a pair of tweezers. Prepare a little container for screws: they are tiny!

Tools

Step 1

This super strong Casio watch is more docile than waht you might think.
We don't need to twist off the front's screws.
It doesn't bite, so let's turn it around

Step 2

With the phillips screwdriver take off these four screws
Lift up an extremity of the watchstrap and remove the base.
You can use a flat screwdriver to help you
With the tweezers lift the white plastic cover
Be careful to not damage the golden springs!! So take your time

Step 3

With the tip of the tweezers you have to unclip the clips into the red rectangles.
Just insert the tweezer's tip in the center of the bracket and pull toward the center of the watch

Step 4

Extract the battery leveraging with the tweezers.
Keep attention to the golden springs again!
The clip, holding down the central batteries, completely removes

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Acn0w

Member since: 20/09/18

14406 Reputation

5 comments

cannot see the “Golden Springs”. Where are they? Thank you

mike.malapascua - 15/02/20

would be nice to have a description if the battery type, to buy before disassembling.. Thank you

mike

mike.malapascua - 15/02/20

Sorry if I wasn’t imprecise, the “Golden Springs” is located above the first battery on the left. More precisely in second step of the guide I marked it.

Coin shaped Batteries are Sony SR927W:

* 1.55 Volt

* 60 mAh

Acn0w - 16/02/20

What about the sticker „After battery replacment, contact AC with battery(+) using tweezers“ ?

ameyer -

Come devo riavviare? Non si accende grazie

stefano chirio -