Introduction
This guide will show you how to remove the power button in order to replace it.
Tools
-
-
First make sure the camera is powered off.
-
Then take the Hex and PH000 bit to remove a 2mm screw on the left side of the camera.
-
Next, remove the 2mm screw on the right side of the camera.
-
-
-
Remove the 3mm screw from the bottom of the camera.
-
Once the 2mm and 3mm screws are removed, use the plastic opening tool to lift the sides of the camera and reveal the inside of the camera.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.