Corded Dexter Jigsaw 750 Watts Blade Holder Replacement

Written By: Céline Chemineau
  • Comments: 2
Corded Dexter Jigsaw 750 Watts Blade Holder Replacement

Difficulty

Easy

Steps

9

Time Required

5 minutes

Introduction

  1. hXjlRxUpFXfBq3SZ

    • Before starting, remember to unplug the device.

  2. qWFEydLlTYeBkEdZ

    • Remove the vacuum hose adapter at the back of the device.

  3. bMiwgBouEdUmq4OM
    bMiwgBouEdUmq4OM
    ARKQJgPdiaXMQdXL

    • With the help of a screwdriver, unscrew and open the device.

    • Use the lever to unlock the cover.

  4. Using pliers, remove the clip beside the blade holder.

    • Using pliers, remove the clip beside the blade holder.

  5. Take off the blade holder, then raise the slide located at the end of the holder.

    • Take off the blade holder, then raise the slide located at the end of the holder.

  6. DyJOuJIAjOXSf6Mr

    • First, put the slide onto the new blade bracket.

  7. Put the blade bracket back in its place.

    • Put the blade bracket back in its place.

    • Make sure to properly put each piece back in its place.

  8. Replace the clip in the same place. The curved side of the clip needs to go into the round side of the bracket.

    • Replace the clip in the same place. The curved side of the clip needs to go into the round side of the bracket.

    • Lubricate.

    • Make sure to properly put each piece back in its place.

  9. d2uGmqhUDNdWJTGJ

    • Close and screw the device back together.

Author

Céline Chemineau

Member since: 29/01/20

16698 Reputation

2 comments

Bonjour,

Je suis intéressé pour changer ce support de lame, le mien étant défectueux … les lames ne tiennent plus. Ou est-ce que je peux trouver cette pièce ? Merci Bruno

Bruno -

Le support de lame de ma scie sauteuse dexter nc750js s'est cassée

Ou trouver ce support ?

Aucun revendeur ne semble avoir les pièces de rechange pour cette machine.

Ou, y a t'il une autre marque équivalente?

Bruno Lamothe -