Cosori Pro II Shell Replacement

Written By: Matthewmm

Comments: 0

Difficulty

Difficult

Steps

Time Required

40 minutes

Introduction

If your Cosori Pro II shell is cracked or broken and you want to replace it with a new shell, If so here is a guide to take apart your Cosori Pro II for easy shell replacement. For this guide, you will need a plastic opening tool and a Phillips #0 screwdriver head

Tools

Step 1

Flip the device upside down and remove all of the Phillips #1 screws.

Step 2

Use an opening tool to push on the retaining hooks to disengage them while prying slightly.
Remove the panel.

Step 3

Use a Phillips #1 screwdriver to remove all four screws.
Lift off the bracket.
When lifting this off be careful to not unplug the screen.

Step 4

Use a Phillips #0 screwdriver to remove all the screws connecting to the shell.
Dissemble the shell going up to separate the basket holder.

Step 5

Use a Phillips #0 screwdriver and the 150 mm Flex Extension to unscrew the bottom plastic connecting to the basket holder.
Be careful to not apply too much force to the metal as it can cause it to warp it, and so it is easy rescrew the plastic piece in place.