Cowin E7 I/O Board Replacement

Written By: Eric Whitaker
  • Comments: 0
Cowin E7 I/O Board Replacement

Difficulty

Easy

Steps

5

Time Required

10 minutes

Introduction

This guide details how to replace the I/O board in your Cowin E7 headphones.

  1. 43WPLWCptFMgb2t1

    • Remove the ear pad the with iFixit opening tool.

  2. aNL4cyhaPNRPO5ws
    aNL4cyhaPNRPO5ws
    g6LTQooxTk5BjQUd

    • Unscrew the 6.5 mm screws around the speaker with a Phillips #0 screwdriver.

  3. GME66eYPUMK6jRCm

    • Lift up the speaker housing.

  4. xi3BseRhQjVopynw

    • Use a Phillips #0 screwdriver to remove the two 6.5 mm screws that secure the I/O board.

  5. 5h2aAlHPpxdWiAJj

    • Disconnect any connected cables then lift the I/O board up and out of the chassis.

Conclusion

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

Author

Eric Whitaker

Member since: 23/09/24

121 Reputation

0 comments