Dell G15-5511 Gaming RAM Replacement

Written By: Hang Bao
  • Comments: 0
Dell G15-5511 Gaming RAM Replacement

Difficulty

Easy

Steps

8

Time Required

5 - 20 minutes

Introduction

This guide provided detailed instructions on how to upgrade the RAM module for the Dell G15 5511 Laptop. Upgrading a laptop's RAM module will boost gaming or multitasking performance.

  1. K1XTP6TD22fCrKdL
    K1XTP6TD22fCrKdL
    YXlyDWmDIS2xlYaq

    • For your safety, discharge the battery below 25% and power down your device before disassembly.

    • Use a Phillips #1 screwdriver to remove the four 6.8 mm-long screws that secure the cover.

    • Use a Phillips #1 screwdriver to loosen the four captive screws.

  2. tsBobRlVUQdu4PEX
    tsBobRlVUQdu4PEX
    u2fpyZHgSHvc2SZ1

    • Insert an opening pick between the bottom-left corner of the back cover and the chassis.

    • Pry up to release the clips securing the back cover.

    • You'll hear a click whenever a clip is released.

  3. MvKGmAa6GlhbOKMb
    MvKGmAa6GlhbOKMb
    MGMUDNY4MZL6GMFF

    • Insert your opening pick again between the bottom-right corner of the back cover and the chassis.

    • Pry up to release the remaining clips securing the back cover.

  4. woRGZpKAaPSTOy1n
    woRGZpKAaPSTOy1n
    ILVlVPqylI5uFCJR
    L2QxpKoxPLGsZqpD

    • Grip the front of the back cover and lift it away from the laptop.

    • Pull the back cover towards you to disconnect the clips along the top of the back cover.

    • Remove the back cover.

  5. 4UssGxSse33RniJr
    4UssGxSse33RniJr
    tvRtVFTGVyAegYFd
    r1MKfpJjwbN6OqM3

    • Locate the component in the circle area, the battery connector on the motherboard.

    • Carefully grasp the connector by its side and pull it away from the mother board.

    • Do not apply excessive force since it could damage the connector or the socket.

  6. vQVVg2hrljqqkXKp
    vQVVg2hrljqqkXKp
    HcFI6ZjN6KEJCENy
    CBUfOoGLYCgNfrri

    • Locate the two RAM slots highlighted by the red rectangles.

    • Locate the metal retaining clip outward, as highlighted by the red rectangles.

    • Carefully grasp the metal retain clips and pull them away from the RAM slot.

  7. fAVZnZHDCGMHreIX
    fAVZnZHDCGMHreIX
    cLjdZOfhsCFsuh65
    ggsPCSDHIBbmyBXC

    • Once the clips are released, carefully pull the module out of the slot.

    • When installing the new RAM, align the notches on the RAM module with the gap in the slot.

    • Push down the RAM until the metal retaining clip snaps into place, retaining the RAM.

    • If you have a second RAM that you want to be replaced, simply repeat the Step 2 and Step 3.

  8. DBcOiYrEQjEtFGNr
    DBcOiYrEQjEtFGNr
    xEdVKtQAKQ4gaBXi
    LUX1OqxHKJT2RSQ5

    • Reconnect the Battery to the motherboard.

    • Using a screwdriver to secure the battery connector, carefully push forward the top part of the battery connector.

Author

Hang Bao

Member since: 24/10/23

136 Reputation

0 comments