Dell Inspiron 8600 Display Removal

Written By: Victor
  • Comments: 0
Dell Inspiron 8600 Display Removal

Difficulty

Moderate

Steps

7

Time Required

15 - 30 minutes

Introduction

The display module is an essential piece of the Dell Inspiron 8600. If it malfunctions or the screen breaks, its removal from the base may be needed for inspection or/and replacement purposes.

 Follow this guide to remove the display module of your Dell Inspiron 8600.

  1. H5bBYX1QTDXQvO15

    • Remove the battery from the bottom left of the laptop as shown.

    • Remove the battery before operating on the computer to avoid electrocution.

  2. VPgLiQ5olbRHLJl6
    VPgLiQ5olbRHLJl6
    xGIKAYgQWGSFcWaQ
    bStcnGCCH4xjBtcD

    • Insert a spudger into the notch at the far left side of the top blue panel and pry the hinge cover off.

    • You may need to pry the other side off as well. You can do this by inserting the spudger between the hinge and the top cover.

    • Be careful of the wire attached to the underside of the hinge cover.

  3. NIPNKk6aaYI4lki1

    • Pull the small black tab on the right hand side of the laptop.

    • You have now removed the hinge cover.

  4. ctofAQmWEIoxMS23
    ctofAQmWEIoxMS23
    2lRbJJBWIaafxoLN

    • Flip the laptop over and remove the indicated screws.

    • Flip the laptop back over.

    • Find the two places where the display module is attached to the base of the computer.

  5. FTr5yemRQWJDRKtg

    • Disconnect the video card from the display module by gently lifting upwards on the black tab.

  6. tLmloPXFiMbSwwj3
    tLmloPXFiMbSwwj3
    MRTwOZsSoeAu15Ji

    • Lift the display module directly upwards from the base of the computer.

  7. cbWZoMsNpduhHHTq

    • Now remove the display module.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Victor

Member since: 07/04/11

187 Reputation

0 comments