Dell Latitude 9410 2-in-1 Battery Replacement

Written By: Jessica Stephens

Comments: 2

Dell Latitude 9410 2-in-1 Battery Replacement

Difficulty

Easy

Steps

Time Required

10 - 20 minutes

Introduction

This guide will show you how to safely remove and replace the internal battery of your Dell Latitude 9410 2-in-1 laptop.

Please be careful of the ribbon cable, it is thin and fragile.

Tools

Step 1

Ensure that the laptop is unplugged and powered off before beginning.
Place the laptop upside down on a flat surface.

Step 2

Use a Phillips #00 screwdriver to loosen the ten captive screws.
The screws are permanently fastened to the base panel; do not attempt to remove them.

Step 4

Use a Philips #00 screwdriver to remove the five 3mm screws that secure the battery.

Step 5

Use a Philips #00 screwdriver to remove one 4.5 mm screw.

Step 6

Grip the battery cable near the plug and pull it straight out, in the direction of the cable.

Step 7

Use tweezers to gently move the speaker ribbon cable away from the bottom of the battery.
The ribbon cable is thin and fragile; handle it carefully.
The ribbon cable only needs to be moved so that the battery can be removed; do not completely remove the ribbon cable.

Step 8

Lift the battery out with two hands.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 comments

This is a fantastic guide. Thanks for posting it.

EAR -

Just one question about the speaker ribbon glued to the battery (Step 7). I can't remove the ribbon from my battery. The glue is very strong. I've pulled firmly, and I'm worried about breaking the cable. Any ideas about how to loosen the glue without damaging the computer, perhaps by applying heat or some sort of solvent?