Dell Precision 5510 Base Cover Replacement

Written By: Johnathan Hammond
  • Comments: 2
Dell Precision 5510 Base Cover Replacement

Difficulty

Very easy

Steps

2

Time Required

2 - 4 minutes

Introduction

  1. fJufTEJVWRqVU2Ne

    • Open the system badge flap over to reveal the screws underneath (marked 1 on the image).

    • Remove the 12 screws that secure the base cover to the computer.

    According to the owner’s manual at https://www.dell.com/support/manuals/en-..., most of the screws for the base cover are Torx #5 with a couple of Phillips #0 under the badge flap.

    KCMax -

  2. uUAIrfDAT4xfPB5A

    • Pry the edges base cover and lift it to remove it from computer.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Johnathan Hammond

Member since: 28/02/18

45237 Reputation

One comment

could you please add the type of screw used for this tutorial?

neosynth1 -