Introduction
Tools
-
-
Looking at the sensor from the bottom, you can see the two tabs/prongs that hold the outer case together.
-
The internal housing will now be exposed. You can use the two tabs/prongs on this porting to remove that portion of the case.
-
Next, you can remove the 4 small screws holding the internal components to the outer shell.
-
-
-
Once the unit is disassembled, you can locate the internal motor of the unit.
-
Using compressed air, you may remove any debris that has become lodged on the intake shield of the motor.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
