Enabot EBO SE Wheel Assembly Replacement

Written By: Kristen Gismondi
  • Comments: 0
Enabot EBO SE Wheel Assembly Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

  1. SosCchgNH3uj4RyT

    • Gently turn the robot upside down.

    • Place the robot on a stable surface to prevent it from rolling or falling.

  2. lbH6WhbIxBq1FlxD
    lbH6WhbIxBq1FlxD
    Zkwk5aWeWHnsPMCa
    ehFtFeoqZJZriEZf

    • Use a flathead 2.5 mm screwdriver to remove the 5.7 mm screw from the wheels.

    • A tool should have been provided in the box for this purpose.

  3. bnVuQfKUKIXNe21s
    bnVuQfKUKIXNe21s
    LtgxdREiK4jj5Pq4

    • Pull the wheel assembly towards you so it comes straight off without resistance.

    • If there is resistance, make sure to apply gentle force when pulling as it can get damaged with too much force.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kristen Gismondi

Member since: 12/11/14

92224 Reputation

0 comments