Equity Alarm Clock 13014 Alarm Replacement

Written By: Alaa
  • Comments: 1
Equity Alarm Clock 13014 Alarm Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

  1. DoROP3tgKET3sMDc
    DoROP3tgKET3sMDc
    CN1dgJEgVXYHZcCx
    VQY1sYwV6UWIiTOP

    • Use a spudger to open and detach the wiring from the box holding the battery.

    • Insert the flat end of the spudger on both sides of the box, gently pry it open and detach it from the clock.

    • Be careful while handling the box and clock to avoid any damage or injury.

  2. OJsFXbSYPw6lRVFQ

    • Use your fingers to remove the box.

    • Be careful not to apply too much pressure or force that could damage the box.

  3. DZ3pAnX4XsvDrxZY
    DZ3pAnX4XsvDrxZY
    CCDHd4xDnnPODXnw

    • Use a soldering iron to melt the solder on each wire connection to safely remove the wires.

  4. mEv3wZBFXGqwTHGT
    mEv3wZBFXGqwTHGT
    QwEQpek1iNEHED5Z

    • To replace the wiring box, use your hand to remove the old one and install a new one in its place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Alaa

Member since: 28/10/14

320 Reputation

One comment

Is there someone I can send my alarm clock to for fixing? IF so, how much would it cost? I do not have the tools nor the know how to do it. Most likely, the alarm will have to be replaced. The little motor on the inside is not working when it is time for it to go off. It does not move the ringer/clanger. Thanks,

mariacarbonell@comcast.net

Maria Carbonell -