Etekcity Lasergrip 1080 Battery Replacement

Written By: Patrick Crawford

Comments: 1

Etekcity Lasergrip 1080 Battery Replacement

Difficulty

Very easy

Steps

Time Required

1 minute

Introduction

This guide will teach you how to replace the battery if it is dead. It will require no tools and has no hazards.

Parts

9V Battery

Step 1

Pull the battery cover away from the handle by gripping near the thumb groove.

Step 2

Gently pull the battery out of the handle.
Excessive force could damage wires.

Step 3

Disconnect the battery by pulling the connector away from it.
Positive first
Negative second
When replacing the battery, this order is reversed.

It is a very easy to change battery once you look t-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Andy Ligor -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Patrick Crawford

Member since: 27/08/15

762 Reputation