Introduction
This is a quick and easy replacement for the exhaust filter on the Eureka SuctionSeal Pet. It requires no special tools, and is a fast replacement. The exhaust filter is responsible for making sure no dust or particulate matter is expelled from the vacuum. When full, it can reduce the suction power of the vacuum by cutting airflow. If you've noticed your vacuum sucking less and have tried this troubleshooting guide, then this replacement guide help you.
-
-
Pull up on the black handle on the top of the canister, and pull away from the body of the vacuum.
-
-
-
Insert a finger into the grey plastic loop and pull.
-
The filter will pop out and leave an empty slot ready for replacement.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
