Flash and re-install the firmware

Written By: Formica Fusca
  • Comments: 0
Flash and re-install the firmware

Difficulty

Very easy

Steps

6

Time Required

2 - 5 minutes

Introduction

Guide on how to re-install the firmware, if it became corrupted and wheel is not powering on.

    • Download and install the drivers from here.

    • Press on the Windows button and type "Firmware Update" into the search.

    • Unplug T-GT from USB port.

    • Keep it plugged-in to power.

  4. NKMSbcCifQFY2GsJ

    • Press and Hold L3 + R3 on the right side of the base.

  5. dKugGZfKepO6v5gt

    • Keep holding the L3 + R3 buttons and connect T-GT II to USB port

    • Once connected, wait a few seconds and let go of the buttons.

    • Switch on the left side of the base needs to be set to OTHER before connecting to USB.

    • Your T-GT II should show up in Firmware Updater.

    • Press OK on the Firmware Updater and wait for update to complete.

Author

Formica Fusca

Member since: 01/08/24

2587 Reputation

0 comments