Frigidaire Side-By-Side Refrigerator Rear Cover Removal

Written By: Bill Gilbert
  • Comments: 0
Frigidaire Side-By-Side Refrigerator Rear Cover Removal

Difficulty

Easy

Steps

3

Time Required

2 - 3 minutes

Introduction

The rear cover provides access to the compressor, condenser, condenser fans, and solenoid water valve.

  1. XlR11FxJ6paUMWVG

    • Use a 1/4" nut driver to remove the four screws securing the rear cover to the refrigerator.

  2. DJwxMtlI3kt1h5mP
    DJwxMtlI3kt1h5mP
    XcMAeQ3xwRNB6jvX
    5bUUZSimjcH5Aw24

    • Lift the rear cover until it is free of the tabs.

    • If your water supply line is in use, turn the supply valve off, and disconnect it at the connection on the refrigerator.

    • If the water supply hose is not used, pass it through the hole in the cover.

  3. Zkt6qhSOkRvYc1G3

    • Remove the cover and set it aside.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our  Answers community for help.

Author

Bill Gilbert

Member since: 30/06/22

37443 Reputation

0 comments