Fugoo Tough XL Case Replacement

Written By: Abdul
  • Comments: 0
Fugoo Tough XL Case Replacement

Difficulty

Moderate

Steps

5

Time Required

15 minutes

Introduction

The Fugoo Tough XL speaker has an external shell that can be removed to make necessary repairs.

  1. VWHioZmOIxHUWHle

    • Remove the four 3 mm screws located in each corner using a 3 mm Hex screwdriver.

  2. RpoxoGP1waeOqxZN
    RpoxoGP1waeOqxZN
    fbRmYRWcRVAnSfxs

    • Gently pull up and off the outer casing.

    • Do not feel afraid to use a bit of force if necessary.

  3. 1TLwLExD3CYBpGek
    1TLwLExD3CYBpGek
    y33TnmE2uyouij2Q

    • Remove the internal device from the outer casing.

    • Remove the four 12 mm screws on each corner using a T10 Torx screwdriver.

    • Remove the eight 6 mm screws on the top and bottom using a T10 Torx screwdriver.

  4. ZYRdwXjPekbijQqR
    ZYRdwXjPekbijQqR
    wNgyiGaiDKGx2uO6
    VNmC2QiWEOfjUHOP

    • Use your hands to gently remove the side plates.

    • Use an opening tool to pry off the back plate with the Fugoo trademark.

  5. RbvbvoNUphsIZinp

    • Slowly pull the front casing from the back casing. Avoid putting any tension on the connected cables.

    • Separate the two slowly and consistently to avoid damaging the speaker cables.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Abdul

Member since: 17/02/17

527 Reputation

0 comments