Google Cr-48 Chromebook Bottom Casing Replacement

Written By: Robert McLaughlin
  • Comments: 0
Google Cr-48 Chromebook Bottom Casing Replacement

Difficulty

Moderate

Steps

4

Time Required

10 - 15 minutes

Introduction

In this step-by-step guide, you will learn how to replace the bottom casing for a Google Cr-48 Chromebook.

*Before starting, please:

  • Make sure nothing is attached (such as AC adapter, USB, VGA, audio jack).
  • Remove any inserted SD card.

  1. huABA2FiCtnG2Vq3
    huABA2FiCtnG2Vq3
    gnGVSkZRnRx5xsxr
    xMZGgYeYJwN2DqkA

    • To take out the battery, slide the switch on the bottom of the laptop.

    • The battery should then pop out and you can remove it.

  2. SBv1xHCQtZJUH12x
    SBv1xHCQtZJUH12x
    jcP2VM5oo3hrgmZC

    • Using a pair of tweezers, remove the two rear rubber feet. You should then see the two screws underneath.

  3. HMZRrNHWlCuAB5ES
    HMZRrNHWlCuAB5ES
    b1bx1qpMcZiZU5Yb
    rQm2t2guiDnZ41oS

    • First, position the computer to have the silver battery compartment closest to you. Then, using a Phillips #00 screwdriver, remove the ten 3 mm screws in the battery compartment.

    • Now, using the same screwdriver, remove the two 4.5 mm screws that were underneath the previously removed rubber feet.

  4. OTWCjSmB1UfFgj2d
    OTWCjSmB1UfFgj2d
    kE2yYIRVKnJFyjQC
    lMwRsqSqNVBJVrnx

    • Starting where the body of the laptop and the laptop screen meet, pry apart the lower case from the rest of the laptop.

    • The case is easier to remove when separating in a clockwise motion, as seen in the pictures.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Robert McLaughlin

Member since: 10/09/14

462 Reputation

0 comments