HP 14-dq0052dx Power Button Replacement

Written By: DamianR
  • Comments: 0
HP 14-dq0052dx Power Button Replacement

Difficulty

Moderate

Steps

6

Time Required

4 - 8 minutes

Introduction

This guide will show you how to replace the power button on your HP 14-dq0052dx laptop.

  1. TEmUn6U1RTCGVLHD

    • Orient your laptop so that the vents are facing upwards.

  2. Sfen1EGBZWimFqwi

    • Remove the rubber feet.

  3. vagDhyuTdEd5MBwj
    vagDhyuTdEd5MBwj
    3C6J4AL1h46CGvLj

    • Remove the four M2.0 x 6 mm screws using a JIS #1 screwdriver.

    • Remove the two M2.5 x 6 mm screws using a JIS #1 screwdriver.

    • Remove the two M2.0 x 4 mm screws using a JIS #1 screwdriver.

    • Use an iFixit opening tool to pry the back cover away from the laptop.

  4. OAm4LCLNTuUaD4lO

    • Remove the single 3 mm screw from the daughterboard using a JIS #1 screwdriver.

  5. VFNqfbcU4KfKhMnV
    VFNqfbcU4KfKhMnV
    PHOqAHFKYnKMGT2Z

    • Detach the cable connector from the daughterboard using a pair of tweezers.

    • Remove the daughterboard from the laptop.

  6. iIQn2V5GZEvj2xd3

    • Remove the power button from the laptop.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

DamianR

Member since: 18/10/24

279 Reputation

0 comments