Introduction

This manual outlines the process of replacing the camera positioned above the screen on the HP EliteBook 1050 G1. Exercise caution when using the heat gun to prevent any damage to the computer or screen, don't forget to be sure to always operate safely and use the materials suggested. Let's proceed with care through the steps outlined in this guide to safely replace the screen on the HP EliteBook 1050 G1.

  1. UrbZru6dQnHK3hVq
    • Use a Jimmy to pry the plastic bezel away from the screen.

  2. JWWjFLciySiJkdQL
    JWWjFLciySiJkdQL
    VKTnaq3ICdSJgDrU
    • Using the heat gun, remove the adhesive from the back of the camera.

  3. MqiEZ2ojfXdrfQVf
    MqiEZ2ojfXdrfQVf
    xRfOnpmKYG5PpovQ
    • Disconnect the camera plug.

    • Remove the camera from the laptop.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ming-chin Wu

Member since: 20/09/21

193 Reputation

0 comments