HP EliteBook 840 G6 Disassembly

Written By: Eric M.
  • Comments: 4
HP EliteBook 840 G6 Disassembly

Difficulty

Moderate

Steps

5

Time Required

15 minutes

Introduction

  1. NK6CHUkgOxVQoRKM

    • Identify the screws.

    Pour voir au changer la batterie comment faire ?

    Brahim Jelti -

  2. gijTRACDCEDi4uIy
    gijTRACDCEDi4uIy
    3TKqaUktWBpvKQdS

    • Unscrew the screws.

    • Screws are attached to the back panel.

  3. LJpmwiRbrvGec1Du
    LJpmwiRbrvGec1Du
    5MsZ2HXitsI6WndG
    Kq6DntKQZKsTVAKJ

    • Use your fingernail or the iFixit Opening Tool.

    • Start on the far side when prying apart.

    • Open the computer.

    • The display should face the table.

    • Separate gently the back cover from the front panel (keyboard panel).

  4. 6lMUIdH3SXvJHZ6H
    6lMUIdH3SXvJHZ6H
    mmJMp5QCwFL1HCa1
    YOCihZ1vholrElVV

    • Open each side gently (keyboard panel is facing up, the back cover is facing down).

    • Store the back cover.

  5. F5aKtJgvnXYYmFbM

    • You now have access to the mainboard.

    Note that the battery is attached using different screws and you need a corresponding screw driver

    Fritz Rothacher -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Eric M.

Member since: 27/12/21

491 Reputation

2 comments

Are the 6 silver-colored screws holding the back cover on all the same length?

David Cary -

The central screw has a different size.

Eric M. -