HP Envy Sleekbook m6-k010dx Battery Replacement

Written By: Ana Novo
  • Comments: 1
HP Envy Sleekbook m6-k010dx Battery Replacement

Difficulty

Easy

Steps

5

Time Required

5 minutes

Introduction

If your computer only turns on when connected to the charger, it might be time to replace your battery. This guide will walk you through simple steps to replace your HP Envy Sleekbook battery.

  1. wt1YLdi5AYTgR3Re

    • Remove the twelve 9 mm Phillips #00 screws.

  2. aUeMQh3TCZGD5ZIw
    aUeMQh3TCZGD5ZIw
    wyXhLn3rsqgZj6qg

    • Use the plastic opening tool and your hands to remove the bottom cover.

  3. G3CVyxbBWjKJDdex

    • Disconnect the battery power cable from the motherboard.

  4. kSeWJ2JJLcLPvoGs

    • Remove the six 6 mm Phillips #00 screws from the battery.

  5. 4K6wuB22khq1NxDV
    4K6wuB22khq1NxDV
    mCxNrDVjDhFELx5P

    • Lift the battery out of the laptop.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ana Novo

Member since: 14/02/18

410 Reputation

One comment

I am going to give this a try.. I took it to Best Buy Geek Squad, they had it for over 3 weeks and said they couldn’t find the part cause my laptop is to old. This wasn’t the only issue. The touchpad wasn’t working and I troubleshooted the problem and I fixed it myself.

I will add another comment once i replace the battery

momw4boys -