HP Pavilion 15-ba003ds RAM Replacement

Written By: Krushnam Badami
  • Comments: 0
HP Pavilion 15-ba003ds RAM Replacement

Difficulty

Easy

Steps

6

Time Required

15 - 20 minutes

Introduction

This guide will detail how to replace the RAM modules in your HP Pavilion 15-ba003ds. You can use this guide if you’re having troubles with RAM, would like to upgrade the amount of RAM in your system, or have problems with blue screens as your RAM modules may be faulty.

  1. nNBFcHJLnvohIREU
    nNBFcHJLnvohIREU
    NkKAO3o6GAcZW6qV

    • Unplug the AC adapter from the corresponding socket in the laptop.

    • Turn off your laptop before starting this procedure. Make sure it's not in sleep or hibernation mode.

    • Use your fingers to push the slider located just under the battery on either side to unlock the battery from the laptop.

    • Carefully slide the battery out of the laptop frame and place it somewhere safe.

  2. U5fHbTu64NityHHi

    • Remove the two rubber feet next to the battery.

  3. eVKLylXFHSRoNv6t
    eVKLylXFHSRoNv6t
    hOX2K6DGgBl62Ksa

    • There are twelve 8mm screws in total that need to be unscrewed

    • Using a Phillips #00 screwdriver, unscrew them all including the two screws found underneath the rubber feet.

  4. DU6LRaPYSQbPUNlK
    DU6LRaPYSQbPUNlK
    UuGCc1XliG1LQgQw

    • Once all twelve screws are removed the disc drive can now be gently pulled out by hand.

  5. QmKdvMmdcxBUnXGa
    QmKdvMmdcxBUnXGa
    uCLkHIaAOGZuGhvm
    2wlsrlGx5jYnV6Jv

    • Use a Jimmy to pry off the black backplate.

  6. rDv3elInR3TYhSZt
    rDv3elInR3TYhSZt
    UCL6YidSGGpVpL3a

    • To release the RAM, hold and pull the strips outwards on either side of the RAM.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Krushnam Badami

Member since: 15/01/20

342 Reputation

0 comments