HP Pavilion x360 11-p110nr Speakers Replacement

Written By: Aeorrell

Comments: 0

HP Pavilion x360 11-p110nr Speakers Replacement

Difficulty

Easy

Steps

Time Required

5 - 15 minutes

Introduction

This guide helps you to replace your speakers on your HP laptop using only a screwdriver, tweezers, and the replacement part. The entire process is fairly quick and easy, and with a bit of care, it can be completed safely at home.

Caution: Anytime you are working with batteries or power, be sure to take care around the electricity and always unplug the battery before you attempt to replace the port.

Tools

Step 1

Eleven case screws are located on the bottom of the laptop. Two will be underneath the rubber feet.
Use a Phillips #0 screwdriver to remove all 6.7 mm screws from the bottom cover.
Carefully take the bottom cover off.
Don't force the bottom plate off. There will be a cable connecting the bottom plate to the rest of the laptop. If you pull too hard you risk damaging this cable.

Step 2

Before fully removing the top cover, locate the cable that connects the audio controls.
Once located, lift the small black flap and carefully pull the cable out.

Step 3

Remove the large cable connecting the battery to the main board
Caution: Lithium Ion batteries provide a risk of electrocution or fire if mishandled. Failure to disconnect the battery before removing the speakers could also lead to risk of electrocution.