Introduction
If your Hitachi CP-X2011N projector's lightbulb isn't working, use this guide to replace the bulb.
The lightbulb is the most important part of a projector, it is source of light that allows the picture to be projected. Since the lightbulb is the most used and most important part, it is very easy to access and replace it. If your projector is not projecting a picture, the most common and likely reason for this is because the lightbulb has just gone out and is just in need of a replacement.
Before beginning, ensure that you have fully powered down the projector and leave it unplugged for the whole repair.
Tools
-
-
Slide the lid away from the body of the projector until it stops. Then, lift the lid upwards to remove it.
-
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.
