Introduction
If your humidifier has stopped absorbing water, you might need to replace the old wick from the humidifier with a new one. For this guide, you do not need any tools but you do need a replacement wick to place inside the lid.
-
-
Pull the wick holder out from the bottom of the lid.
-
Grasp onto the plastic wick holder and pull upwards until it pops free.
-
-
-
Remove the old wick from the wick holder.
-
Tilt the wick holder to the side and gently slide the wick out of its container.
-
-
-
Place new wick into the wick holder.
-
Grab a replacement wick from the box the humidifier came in and gently slide it into the wick holder.
-
-
-
Insert wick holder back into the lid.
-
Grab the wick holder and insert it into the lid on the end where the wick itself enters the lid and the spring side remains in the air.
-
To reassemble your device, screw the lid back onto the container and turn it on.
