Honda Accord Car Key Remote

Written By: Emerson Corado

Comments: 1

Difficulty

Moderate

Steps

Time Required

30 minutes - 1 hour

Introduction

Is your Honda Accord key having trouble functioning? Is your car not responding to your key lock or unlock buttons? This guide will help you replace the battery on your car keys and replace it with a brand-new battery.

Tools

Parts

CR2032 Lithium Battery

Step 1

Locate the screw in the middle of your car key.
Make sure you have the following tools - Tri-point Screwdriver - CR2032 Battery

Step 2

With your screwdriver, begin to screw in a counter-clockwise motion.

Step 3

Each key should have a small gap. Locate this gap on the side of your key.
After you have taken off the screw, place the small screw somewhere safe. Then with the same screwdriver or a flathead screwdriver, you want to apply pressure to the small gap to pop it open.

Step 4

This is an example of how the key should look after you pop it open.

Step 5

Do not touch the other half of the key
After popping open the key, the battery should be located on the left half of the key.

Step 6

Apply pressure with the flathead screwdriver, and the battery should pop out once again.

Step 7

swap the old battery with the new battery
Make sure the smooth part of the battery is facing inside and not facing outwards as shown on the picture

Step 8

Lastly, place the key back together and screw the middle part back with the tri-point screwdriver.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Emerson Corado

Member since: 08/12/22

157 Reputation

One comment

You listed the wrong battery. It uses a CR1620 not a CR2032. Your picture even shows the correct battery. Also I believe it is a P000 screwdriver, that is what fit my 2013 Accord key.

Mark Fox -