Honda S2000 VTEC Solenoid Upper Replacement

Written By: Angeljauregui
  • Comments: 0
Honda S2000 VTEC Solenoid Upper Replacement

Difficulty

Easy

Steps

9

Time Required

5 - 30 minutes

Introduction

This is a guide to change a S2000s Vtec solenoid upper which is a part that is known to fail with time

  1. KSVKvqHMrfwOwebG
    KSVKvqHMrfwOwebG
    jQPbHaMw6LYNB5xT

    • Locate Vtec Solenoid on front left of engine.

  2. FZCXEjw2FLhH1kNO
    FZCXEjw2FLhH1kNO
    Nj1DdwyJQR4PSCYw
    WbofaYLu2mLAB4Vk

    • Locate and remove 3 bolts.

    • Do not drop cable that is attached by a bolt.

  3. c6qfEVAjWBcKNWKh
    c6qfEVAjWBcKNWKh
    y5jSIoMfMYLvBfo4
    JlRLAyRv2gASlqDi

    • Pull the plug upwards off of metal cable holder, and then disconnect the two cables.

  4. DgelDZ1M4VhuJ3DJ
    DgelDZ1M4VhuJ3DJ
    RPKB4qldS63lQWu1
    UjjgtFWiChw4hQ2L

    • Remove the metal cable holder and set it to the side.

    • Pull off the upper Vtec Solenoid.

  5. MNQrZT5DMvPKk3mo
    MNQrZT5DMvPKk3mo
    luhDMeuNY5uB4f3o
    dcrjFILdqLaDNiZI

    • Grab a new replacement upper Solenoid.

    • Place the gasket (new or used if still good) into its slot.

    • Spread a small amount of oil all along the gasket.

  6. pPXFmrhGpCoDlp5v
    pPXFmrhGpCoDlp5v
    VXGiHm2KUsGiFFQL

    • Insert wisdom here.

  7. lP6taWjQ56tGtMjy
    lP6taWjQ56tGtMjy
    vkkNlv1WORNFepnx
    WoF1ZhGmyxaZEFqw

    • Grab metal cable holder and place one of the bolts into it.

    • Hand tighten all three bolts.

    • Ensure the metal cable holder is straight.

  8. pyEZDXdWVEgYOkVh
    pyEZDXdWVEgYOkVh
    stZUristgbgCSb51
    lPWJEm1GXJXlrSAj

    • Tighten all 3 bolts with a ratchet.

    • Plug the cable back in, and attach it to the metal holder.

  9. XKVvjGlQomhBEGMY
    XKVvjGlQomhBEGMY
    1IY6qUoWK52jJk6C

    • Wipe down the edges where the two parts meet to pick up any oil that may have spilled.

    • Keep a eye on solenoid for any oil leaking after cleaning.

Conclusion

You now have a proper working Solenoid, Just make sure to keep an eye on the solenoid in case of any oil leaks

Author

Angeljauregui

Member since: 13/03/24

169 Reputation

0 comments