Hoover Rogue 970 Wall Brush Replacement

Written By: Malcolm Mcdonald
  • Comments: 0
Hoover Rogue 970 Wall Brush Replacement

Difficulty

Easy

Steps

3

Time Required

3 - 5 minutes

Introduction

This guide is for the Hoover Rogue 970 (Model BH70970) Smart Vacuum.

Are your Hoover Rouge 970 wall brushes not able to move, preventing the vacuum from cleaning? If so, here is a guide to fix the problem with a simple change of the wall brushes.

If this simple replacement doesn't fix your issue, visit our Wall Brush Motor Replacement Guide!

  1. j2matRB1XYF5I6eD
    j2matRB1XYF5I6eD
    LgwHhUyNRqnHOGKu
    AQtHty11kt2eXy3f

    • Flip the vacuum over so the wall brushes are facing up.

  2. MpsGeD42cHbEaU1A
    MpsGeD42cHbEaU1A
    jNNcFEeHfxslGRLi
    uQsvGIEqjAgUNnVq

    • Remove the two 8.2 mm screws using a Phillips #2 screwdriver.

  3. cmsvdpIOPKDVNCaT

    • Gently lift up on the wall brushes to remove them from the vacuum.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Malcolm Mcdonald

Member since: 02/10/23

281 Reputation

0 comments