How to Calibrate Gimbal on DJI Mavic Air 2

Written By: Arty
  • Comments: 7
How to Calibrate Gimbal on DJI Mavic Air 2

Difficulty

Easy

Steps

0

Time Required

10 - 15 minutes

Introduction

Use this video tutorial and learn how to calibrate a gimbal on DJI Mavic Air 2.

If your PC does not detect your drone and the drone is listed as a "bulk interface" or unknown device in the device manager, most likely your PC did not find drivers for your drone. In this case, download and install DJI Assistant 2.

Download links

Python: https://www.python.org/

PySerial: https://pypi.org/project/pyserial/#files

GitHub: https://github.com/o-gs/dji-firmware-too...

7-zip: https://7-zip.org/

DJI Assistant: https://www.dji.com/es/downloads/softwar...

Script

Step 1: py comm_og_service_tool.py --port com pcode GimbalCalib JointCoarse

Step 2: py comm_og_service_tool.py --port com pcode GimbalCalib LinearHall

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Arty

Member since: 27/10/19

27826 Reputation

7 comments

I replaced the coxial cable and gimbal and i can get it to calibrate on the linear?

Harrison -

How to calibrate the Air 2s gimbal camera after replacing a new one?

Jimmy Chan -

Im going through the same thing, ive watched about 20 youtube videos and followed about 4 step by step and my gimbal still wont calibrate...

Chris Baillio -

I can get my Air 2s to calibrate on Joint Course, but it's unresponsive to the Linear Hall command. Any solutions?

Brett Wallace -

py setup.py install returns a module not found error message.

Jonathan maendel -

I get the same response

Arleigh Campeau -

I have tried this method. Everything seems to work until I get to the DJI file py.setup.py install to do the install and it says there’s a file missing and it won’t go any further than that. Please advise. Thank you.

David mack -