How to Fix a Broken Decorative Ceramic Bowl

Written By: Katelynn
  • Comments: 0
How to Fix a Broken Decorative Ceramic Bowl

Difficulty

Moderate

Steps

6

Time Required

30 minutes - 1 hour

Introduction

If your decorative ceramic bowl has been broken, one can reference this guide for step-by-step instructions for repairing decorative ceramic pieces. Before reviewing this guide, it is important to note that it is meant for decorative ceramics only. When handling epoxy, try to be minimal and precise with the application to avoid excess paste.

  1. jke6LOsHVpvLQPxt

    • Clean the broken ceramic with rubbing alcohol.

  2. 2Z42QItPCoGfKccI
    2Z42QItPCoGfKccI
    1ZjiyT5svHWMNDjV

    • Mix epoxy to paste the pieces of ceramics together.

    • If you are using Epoxy that is not pre-mixed, combine the two-part Epoxy using a paper pad and wooden stick.

  3. CfBIgRoruJVdVSAX

    • Apply Epoxy to the edges and place the broken ceramic pieces in their permanent location.

    • Press the broken pieces firmly together.

    • Epoxy will ooze out. Do not wipe off to avoid smearing.

    • Use the container of sand to help hold pieces in place.

  4. 4WtDbJlmRUXOrpSF
    4WtDbJlmRUXOrpSF
    2A54WVcvrF2OMD5S

    • Use clay for securing the attached pieces during the curing process.

  5. U1UDK6f3OrpWmoE2

    • Use the Exacto knife to remove the excess dried Epoxy from the bowl.

    • Be cautious while handling the tool. The blade is very sharp.

  6. hQbvfWl2TfUVObv6
    hQbvfWl2TfUVObv6
    Brc62asLLMSEqQYI

    • Check if the pieces are secure.

    • Let the bowl set for an hour before use.

Author

Katelynn

Member since: 05/11/24

133 Reputation

0 comments