Introduction

  1. SaOfLbkeAxgmho5g
    • Unplug your refrigerator before you begin your repair.

    • If you are testing or repairing the following items, you may also need to shut off and disconnect the water supply:

    • Condenser Fan Motor

    • Compressor Motor and Thermal Overload Device

    • Water Supply Valve Assembly

  2. 12oWVSSbYPPsXnTh
    • Use a Phillips screwdriver to remove the six 14.5 mm‑long screws securing the condenser cover to the rear of the refrigerator.

  3. 6ujgQifv1qTA2ZLx
    6ujgQifv1qTA2ZLx
    ILLcLtms5rQhEpuN
    JR2jxCNGGMReUhWs
    • Tilt the top edge of the condenser cover toward you.

    • Lift and remove the condenser cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Bill Gilbert

Member since: 30/06/22

37443 Reputation

0 comments