How to open an Aneng AN8008

Written By: Sebastian
  • Comments: 0
How to open an Aneng AN8008

Difficulty

Easy

Steps

6

Time Required

1 minute

Introduction

This guide provides detailed instructions to disassemble your multimeter, allowing you to access internal components for maintenance or repair purposes.

  1. NHELJOPmPsNx2r2X
    NHELJOPmPsNx2r2X
    uVXFDVaTRgnZXOt5

    • Place the multimeter on its front.

    • Flip up the kickstand.

  2. Q5xTdrbnO1wZNsVH

    • Use a PH1 screwdriver to unscrew the single screw holding the battery cover and kickstand.

  3. QQ4IfSl6dPZmHkGi
    QQ4IfSl6dPZmHkGi
    EGuBjQWVRwYMQWcD

    • Remove the battery cover and kickstand.

    • Remove the batteries, if present.

  4. lYFHblaCPlH2oaQu

  5. KVXGFB4utAJoauD2

    • Insert a pick into the top gap between the backshell and front cover.

    • Partly leverage the front cover away from the backshell.

  6. 65XTipfwKwKJi5kW
    65XTipfwKwKJi5kW
    mej5MC3DuVxuLTZo

    • Insert a pick into the bottom gap between the backshell and front cover.

    • Fully leverage the front cover out of the backshell.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sebastian

Member since: 19/08/18

28112 Reputation

0 comments